Amaltas Dry Extract is a botanical ingredient derived from Cassia fistula L., a flowering tree commonly known as Amaltas or the Golden Shower Tree. It belongs to the Fabaceae family and is recognized by its long pods and bright yellow flowers. Commercial Amaltas extracts are produced from specified plant materials, most commonly fruit or pod pulp, and are processed into a concentrated dry ingredient.
The characteristics of Amaltas Dry Extract depend on the plant part, extraction solvent, extraction ratio, concentration process and drying method. Commercial grades may be conventional extracts or materials standardized to a defined constituent or analytical parameter. Buyers should confirm the exact grade before comparing specifications or selecting a material for formulation.
The accepted botanical name is Cassia fistula L. The plant belongs to the Fabaceae family, also known as the legume family. Amaltas is widely known in India and is associated with traditional botanical preparations.
The fruit is a long pod containing seeds and dark pulp. In some traditional specifications, the fruit pulp is separated from the seeds, internal partitions and pieces of outer pod wall. Other commercial products may use a broader pod material. The product specification should clearly state whether the extract is prepared from fruit pulp, whole pod or another plant part.
This distinction is important because the chemical profile of the raw material can vary according to the plant part used. Botanical identity and plant-part traceability should therefore be confirmed through the approved TDS and batch-specific documentation.
Amaltas Dry Extract may be prepared by extracting the specified plant material with water or another documented extraction solvent. The extract is then processed through appropriate concentration and drying operations to obtain a powder. The exact solvent system, extraction ratio and drying method depend on the commercial grade.
A dry extract may also contain a carrier such as maltodextrin, depending on the manufacturing process. Any carrier or additive should be declared in the product documentation when relevant. Buyers should distinguish the native extract from the finished powder that includes a carrier.
Extraction ratios such as 3:1, 5:1 or 10:1 should only be used when they are supported by the manufacturer’s documentation. The ratio alone does not establish the percentage of a particular constituent or prove equivalence between two extracts.
Amaltas extracts can be characterized using different analytical parameters. Depending on the grade, the specification may refer to mucilage content or an anthraquinone-related parameter. These represent different approaches to characterization and should not be treated as equivalent.
If the product is standardized, the TDS should identify the target constituent or parameter, the acceptance limit and the analytical method. For example, a grade specified for mucilage should not automatically be described as standardized to anthraquinones. Similarly, a grade characterized by an anthraquinone-related assay should not be assigned a mucilage percentage without supporting results.
Other quality parameters may include moisture content, ash, particle size, bulk density, solubility and organoleptic characteristics. Actual values should be taken from the approved product specification and verified against the batch Certificate of Analysis (COA).
Amaltas Dry Extract is generally supplied as a dry powder. Its colour, odour, taste, texture and flow properties can vary according to the source material, extraction solvent, concentration and drying process. The presence of a carrier may also affect the physical characteristics of the finished powder.
Quality assessment may include appearance, odour, moisture or loss on drying, ash content, particle-size distribution, bulk density and solubility where applicable. These parameters are useful for assessing storage, handling and compatibility with other ingredients. They should not be assigned universal values without a confirmed grade specification.
A suitable quality-control programme should verify botanical identity, plant part, extraction process and any declared standardization parameter. Where a marker or constituent is specified, the analytical method and reporting basis should be documented. Batch-specific results should be checked against the approved acceptance limits.
Additional quality controls may include heavy-metal testing, pesticide residues, microbiological limits and residual solvents where applicable. The test plan should reflect the source material, manufacturing process, intended application and destination-market requirements.
The COA should identify the batch and report the actual results for the supplied material. The Technical Data Sheet (TDS) should state the botanical identity, plant part, extraction ratio where established, carrier system where applicable, specifications, storage requirements and shelf life. Claims about certifications or special quality attributes should be used only when supporting documentation is available.
Amaltas Dry Extract may be evaluated as a botanical raw material for suitable herbal preparations and other permitted commercial formulations. The appropriate grade depends on the plant part, extract characteristics, intended application and regulatory requirements. A fruit-pulp extract, whole-pod extract and extract standardized to a specific parameter should not be assumed to be interchangeable.
Formulators should confirm the powder's compatibility, moisture level, carrier content, solubility and processing characteristics before use. Product claims and instructions for use must be assessed separately against the relevant evidence and regulations. Botanical identity alone does not establish a specific health outcome or authorize a therapeutic claim.
Store Amaltas Dry Extract in suitable, tightly closed packaging under the conditions stated in the approved TDS. Protect the material from excessive moisture, heat, direct sunlight and contamination. Reseal the packaging after sampling and maintain batch traceability throughout storage and manufacturing.
The appropriate shelf life and retest period should be supported by the manufacturer's documentation and, where applicable, stability data. Storage conditions may vary according to moisture level, packaging material and carrier system. Follow the approved instructions for the specific grade.
Before purchasing, confirm that the product is derived from Cassia fistula L. and establish the exact plant part used. Determine whether the grade is a conventional dry extract or is standardized to a defined parameter such as mucilage or an anthraquinone-related assay.
Review the extraction solvent, ratio, carrier content, analytical methods and batch-specific COA. Check the applicable contaminant limits and microbiological results. These details help purchasing and formulation teams select a material that matches the required specification and can be evaluated consistently across batches.
Amaltas Dry Extract is a concentrated botanical ingredient prepared from specified plant material of Cassia fistula L., commonly the fruit or pod.
The accepted botanical name is Cassia fistula L. The plant is also commonly known as the Golden Shower Tree.
Commercial extracts may use fruit pulp or pod material. Confirm the exact plant part from the product TDS and COA.
It describes a stated relationship between the starting plant material and the resulting extract under the manufacturer's defined process. It does not independently establish a specific constituent percentage.
No. Different grades may be characterized by different parameters, including mucilage or an anthraquinone-related assay. Verify the specific standardization and method.
Request a current TDS and batch-specific COA. Review the botanical identity, plant part, extraction details, standardization, contaminant testing and storage information.
Follow the approved TDS and keep the material sealed and protected from moisture, excessive heat, sunlight and contamination.
The final Amaltas Dry Extract specification must reflect the actual grade supplied. Do not publish assumed extraction ratios, marker percentages, carrier contents or numerical quality limits without confirmation from the approved TDS and batch-specific COA.
| Parameter | Specification |
|---|---|
| Appearance | powder |